Top 10 Ways to Get Water Out of Phone's Charging Port 6k1062

Key Takeaways

Charging a wet phone is unsafe and can damage the charging cable and port, leading to electrical shocks.
To remove water from the charging port, gently tap the phone, dry the surface with a soft cloth, and leave it to evaporate naturally.
If the port is still not working, use a wireless charger or seek assistance from customer .

Do you accidentally drop your phone on water or any liquid substance? If so, then it might be a headache for many s as not every phone comes with an IP rating or waterproof feature. Well, that’s the reason why we are here. Today, in this comprehensive guide, you will learn about some amazing tricks using which you can use to resolve the water damage issue with your phone. So, if you want to know how to get water out of the charging port, read this guide until the end.

Contents show

Is Charging Your Phone While It’s Wet Safe? 686t3e

Is Charging Your Phone While It's Wet Safe?

While it’s still wet, charging your phone can result in unwanted issues. Both the charging cable and the pins inside the charging point are susceptible to damage. These could stop working, which would affect the mobile device accessories and the charging port.

In the worst-case situation, charging a wet smartphone could result in electric shocks. Therefore, charging a phone while it’s still wet is never a good idea.

How Do I Get Water Out of the Charging Port? iPhone/Android s 6a6e12

First of all, we strongly advise against clicking the “Emergency Override” option. Hold on, don’t be alarmed. Get rid of the extra water by gently tapping on your phone. When working with electrical cables, wear gloves. Furthermore, avoid attempting to insert any pointed objects into the charging port because doing so may interfere with connectivity.

Get Rid of Moisture 6n1n6i

Get Rid of Moisture

The first step that needs to be taken by s is to dry off all the Moisture from the charging port’s surface in order to fix if your phone accidentally dropped into the water and now you want to get water out of the charging port. You can reach for a towel, but using a soft, light fabric cloth will absorb more quickly.

The towel should be gently rubbed inward to absorb as much Moisture as possible. Be gentle; being hard may harm the port or force additional water inside. Allow your phone to dry naturally for 30 minutes or so.

Leave it for Evaporation 2tb1m

Waiting for the Moisture to evaporate gradually is the best method to get water out of the charging port. The Moisture that has been retained inside the port should often disappear on its own after a few hours. Be sure to place your gadget in a well-ventilated, upright position.

Use a Portable Charger 6te5i

Use a wireless charger if the above solutions don’t work to charge your phone using a charging cable after you get water out of the charging port. Before you plug your phone in, make sure it’s dry from the outside at the back.

Speak with customer 3f4t6j

If none of the above techniques works and you are aware that the charging port is broken, you could try ing customer . s of Android can access their help page by visiting their official website. Even better, you can get prompt assistance by going to the nearest walk-in service centre.

Visit the company’s website and navigate to the Apple section if you have an iPhone. If the above repairs don’t work, you could also try taking your iPhone to a nearby walk-in service centre.

Other Approaches: Myth or Useful? 5l2t58

There is plenty of advice available for simple fixes to get water out of the charging port. If you’re in a hurry, you might want to attempt some of these fast and easy methods, but the majority of them are ineffective and may even harm your device more. Let’s clarify some myths that are widely held yet actually cause more harm than benefit.

1. Dry in the sunlight 5x3d5a

It’s a widespread belief that letting your phone dry out in the sun would work as a solution. But did you realize that exposure to the sun for an extended period might permanently harm your device?

High temperatures have the potential to seriously harm your phone’s internal parts. It can cause the battery to overheat and the tiny circuit to bend, permanently damaging its internal components.

Additionally, exposure to sunlight for an extended period of time might break the screen and create blurriness, which makes the touch-screen unresponsive.

2. Try to Dry your Phone inside the Jar of Rice 1s1m6e

Try to dry your phone inside the jar of rice

Placing your moist phone inside the jar of rice grains is another common method for speeding up the drying process. It’s a tried-and-true technique for getting water out of your wet equipment.

As common as the method may sound, it may really cause more harm to your phone. While rice can absorb Moisture, it may also leave behind tiny dust and dirt inside the USB port, which might cause extra issues. Silica gel packs could be kept nearby as an alternative to get water out of the charging port.

3. Fabric Wipe 145i5g

Fabric wipe

Another dangerous idea is inserting a cotton ball inside the port. It is never a good idea to force anything inside. A cotton ball pushed inside will either force more water inside or, worse yet, could weaken the port’s connection points.

4. Try through hair Dry 69316t

Also, refrain from using a blow dryer. Blowing air into the port may cause the water to go deeper within, which is more detrimental than beneficial. Heat-sensitive parts include the battery, seals, and screen.

The sections of the port can be harmed by blowing hot air straight into it. Despite the fact that some phone parts can withstand heat, sensitive internal parts can be damaged, so it’s better to keep your phone away from hair dryers.

5. Allowing Your Phone to Rest 2k6g34

You shouldn’t leave your phone sitting around while it’s still wet for too long since corrosion can develop as a result. This process is slowly damaging the internal components of electrical devices. You can see corrosion buildup over the few weeks it takes for the environment to adjust.

False Liquid Detection Alerts: How are they Fixed? iPhone/Android s 4xw12

Even when you get water out of the charging port, there are situations when you receive misleading moisture detection alarms. Here’s how to fix the issue:

1. Turn off the Moisture Alert 1y1c4s

If you are assured that the port is dry, you can turn off the moisture detection alert in the settings.

Access Settings
Select Battery Usage.
Click Recent Battery Usage at the bottom of the page.
Select Android System.
Then click on Force stop.

2. Upgrade Your Device 6p194g

Minor issues can be fixed by updating the OS. If there has been a software update, your problems with bogus liquid alteration may be fixed.

3. Replacement of the Charging Cable 34e1c

Examine the charging wire to see whether it is damp or if any damage has resulted in false alarms. You may disable these alerts by switching the charging cable.

4. Reboot your device in Safe Mode 693458

After a power cycle, you can restart your phone in safe Mode if you still get false alarms.

s of Android:

Turn off your phone for a short duration of time.
For two to three seconds, hold down the power button. Confirm Restart in safe Mode should appear as a pop-up notification.
Click the “OK” button.

s of iPhones:

Turn off your iPhone for 30 seconds.
now switch on your iPhone
Hit the side button while it is turning on until the Apple sign appears.
Your iPhone automatically enters Safe Mode when you restart it.

5. Check the Charging Port for Rust. 44215o

False warnings may be generated by rust or other tiny particles that have become lodged inside the port. Check with a flashlight, but avoid inserting any pointed objects.

6. Consider a Complete Factory Reset. 1m4f6p

You might wish to choose a “Full Factory Reset” if nothing else works. It’s critical to understand that a complete factory reset will erase all of your data, including s and photos. Decide to have a storage backup, therefore.

It’s recommended to do a full factory reset at the very end after all other options have failed because it cannot be undone.

s of Android:

Access Settings.
Then select Reset and Backup.
Then, tap the Factory Data Reset button.
Now, choose Delete Everything.
This might change depending on the model and the brand you’re using.

s of iPhones:

Access settings.
Go to General Settings.
Next, select Reset iPhone.
Then, choose “Reset All Settings” from the menu.

Conclusion 685h2e

Your phone is now entirely dry if you don’t see any additional changes in its moisture/liquid sensing settings. So, now you know how to get water out of the charging port. Therefore, now enjoy using your phone. We hope that you find this article helpful. But, for any further queries, comment below and let us know.

RELATED GUIDES:

How to Get Water Out of Phone’s Charging Port 52759