Top 7 Ways to Fix Starlink Motors Stuck Error Message 6l4l6j

Starlink has quickly become one of the most popular internet providers in the US and nearby countries. Thanks to Elon Musk and the use of satellite constellations, many s are switching to Starlink for high-speed internet. But as more people install Starlink at home, new issues are starting to show up — one of them is the Starlink motors stuck error. If your dish isn’t moving or adjusting properly, don’t worry. This guide will walk you through simple steps to fix the Starlink motors stuck problem in 2025.

What Causes The Starlink Motor Stuck? 2s663s

Starlink is different from other fiber or internet service providers. It works with the help of a satellite or mast that is usually placed at the top of the house. When that satellite is unable to position itself facing the constellation or other internet satellites, your internet may suddenly stop working.

Now, when the internet stops working, there’s a tiny error in the Starlink app that says Starlink Motors Stuck – Check for anything preventing your Starlink from moving. If the motor is stuck, the Satellite won’t be able to position itself, which will cause lots of problems. Now, the Starlink motor can get stuck due to a variety of issues, such as a bird striking against it, a tree branch falling, or perhaps it was extremely cold last night, and your Starlink has frozen. Whatever the reason, the next section will help you fix it.

How to Fix The Starlink Motors Stuck Error 3v6b5o

Here are the 7 best and easiest ways to fix the Starlink motors stuck error. If you are facing this problem, make sure that you don’t skip any steps and follow them genuinely.

1. Check Dish For Movement Blockers m4w68

If you are well aware of the best Starlink accessories or mounts, you must have installed your Starlink on the roof of your house. Now, the Starlink mounted on top of your house is mounted there so that it can be free of obstructions and other problems. However, when something strikes against it, like a bird or a tree branch, the movement can stop. Therefore, It is possible that something is stopping or blocking the movement of the dish.

If a branch, twig or even a bird has struck against your Starlink, you can encounter the Starlink Motors stuck error. Consequently, at this point of time, you should climb up and check what is blocking the movement. If everything is fine, move on to the next fix.

2. Check For Obstruction 6v277

Sometimes, if the sky is full of obstructions, your Starlink may give motors stuck error. While this is not 100% sure, but sometimes the sky is all to blame. In this case, you don’t have much to do but wait until the sky gets clear. This problem is even more evident when there are clouds in the sky, it is raining or snowing.

If obstructions are a problem, here are the steps to check for obstructions on Starlink:

1. Open the Starlink mobile app.
2. Now, tap on Obstructions.
3. Now click on Check For Obstructions.
4. Your camera will open at this point, and you can scan all around
5. If you have your dish planted for more than 12 hours, you can go to the sample place and tap on Obstructions.
6. Check the graph. If it shows around 5%, the issue is not with obstructions. However, the data shows more than 11% of obstructions, the problem is clearly with this.

Depending on the problem, fix issues with your obstructions. For this, we recommend checking Starlink mounting options because only a good mount can solve this problem.

3. Dish Has Fallen 635m33

Another thing that can cause the Starlink motors stuck error is a fallen dish. If your dish has fallen due to inevitable circumstances like wind or bird, you can experience the Starlink Motors stuck error.

In that case, your wish action would be to climb to your Starlink dish and check. If it has fallen, pick it up and check for any possible damage. At last, put it up in the same position and reboot Starlink.

4. Reboot Your Starlink 3bm3w

If none of the above things have happened with your Starlink, it is possible that a simple glitch or bug is causing the Starlink motors stuck error. In that case, a simple restart would be enough to bring your Starlink back on track and start working.

Rebooting is a simple process, and you might already know how to do it. However, if you are having problems, here’s our guide to rebooting Starlink. If you don’t have the time to perform everything, simply pull the plug, wait for some time, and then plug it in. At last, check whether you see the Starlink motors error. If yes, follow up with the next fix.

5. Dish Mounted Horizontally 40327

If either your dish is mounted Horizontally or it is too high, the Starlink motors stuck error can be shown. If you have followed our guide about setting up Starlink, you might have taken it too seriously, and now your Starlink is sky-high.

A sky-high Starlink, although good for the internet, is sometimes not good for your Starlink satellite. With the increase in height, the wind pressure increases considerably. This causes difficulties for the Starlink motor to move and adjust the satellite. While the Starlink motor is powerful enough to move the dish, it is not as powerful as a motor with power in HP.

Also, if your Starlink is mounted horizontally, like facing the sky, it can cause the motor to stop working. This is because it has no space to move or adjust according to the constellation of satellites. It is always recommended to keep the Starlink satellite in a vertical position as that will offer space and area to adjust the satellite.

At this point, if the above stands true for you, try to lower your satellite a bit and use the obstructions tool to check for obstructions. Next, fix it. Check whether you received the Starlink motors stuck error again or not.

6. Stow The Starlink 576r7

The last option you have is to stow the Starlink. Stowing is meant to be used only when you are transporting your Starlink from one place to another your when you are giving it for service. Stowing is a really simple process, but if you face any problems with stowing, here is our guide on how to Stow Starlink. Check out this guide carefully, and after applying that, your motor should start working.

While Stowing is not a definitive way to fix Starlink motors stuck error, it gives the dish a push from the motor that is sufficient to fix any jams or blockages inside that are causing the problem. However, if even this is not able to help you, the last fix is the only option left.

7. Starlink Customer 6i583h

The last and final option you have to fix the Starlink motors stuck error is to Starlink customer . However, doing that is not easy. We recommend checking out our guide to Starlink customer .

The Starlink customer team works with a ticket system. Therefore, you don’t have any option to directly call or speak with a representative. If your Starlink dish is under warranty, you should be able to get a new Starlink soon enough. But if your service is out of warranty, you will need to pay money. Make sure to discuss this with Starlink.

If you manage to get a replacement of your Starlink under warranty, there are more warranty claiming considerations that you might want to know.